
Cabinet Ageing Ovens

EB 04-II – Precision Cabinet Oven for Standards-Compliant Material Aging
The EB 04-II is a high-precision cabinet oven designed for the thermal aging of rubber and plastic materials. Featuring accurate temperature control, adjustable airflow, and low air velocity, it meets the requirements of ISO 188 Method A – making it ideal for laboratory and quality assurance environments.
1. Key Features & Technical Highlights
✅ Precise temperature regulation for consistent and repeatable test results
✅ Two available sizes – with 60 L or 120 L usable volume
✅ PLC-controlled color touchscreen – for intuitive operation and quick setup
✅ Excellent temperature stability and uniform distribution throughout the chamber
✅ Dual temperature sensors – for chamber control and measurement near the samples
✅ Logging interface – compatible with data acquisition software
2. Standards-Compliant Airflow & Accessories
✅ Adjustable air exchange rate – 3 to 20 air changes per hour
✅ External air supply required – to meet airflow standards
✅ Optional: Quiet compressor EA 01 – recommended if compressed air is not available
3. Versatile Applications
✅ Ideal for aging tests on finished products and large test specimens
✅ Includes shelves and support rods – adaptable for various sample geometries
📌 Note: For best performance, the oven should be operated in environments between +10 °C and +30 °C.
With the EB 04-II cabinet oven, you get a powerful, user-friendly, and standards-compliant solution for precise aging tests across a wide range of materials.


Specifications:
Standards:
ISO 188 method A, IEC 60811-401, IEC 60216-4-1, Other equivalent standards
Temperature range:
+40 °C to +200 °C (EB 04-II), +40 °C to +300 °C (EB 04-IIHT)
Useful volume:
60 or 120 litres
Accessories supplied:
- 2 shelves, 10 sample rods (12 sample rods for 120 litre model)
- Stylus pen for the instrument's touchscreen
- Accredited calibration incl. certificate
- Manual in English
Important Specifications:
- Low air velocity (<0.002 m/s)
- Adjustable air exchange rate via flow meter, 3 to 20 changes per hour
- Temperature fluctuation over time ± 0.25 °C
- Temperature fluctuation in the room ± 0.5 %
- Temperature display with sensor in the inner chamber (PLC)
- Temperature controller with 0.1°C setpoint (SPS)
- Adjustable upper and lower temperature limits with alarm (PLC)
- Fixed overtemperature protection
- Control via a micro PLC with colour touchscreen
- Test names can be specified in the PLC
- Low air pressure alarm (PLC)
- Improved insulation reduces energy consumption, environmental impact and costs
- Cooling channels in the housing for low surface temperature
- Power failure indication (SPS)
- Runtime meter (SPS)
- Countdown timer for each cell (SPS)
- Alarm history
- Microfilter for the air that removes 99.99% of all particles above 0.1 μm
- Door with two-point locking system
- Easy installation and removal of the shelf

EB 12-II – High-Speed Cabinet Oven for Standards-Compliant Material Aging
The EB 12-II is a purpose-built cabinet oven designed for the controlled aging of rubber and plastic materials under high airflow conditions. Featuring laminar airflow from bottom to top and a factory-set throttle for a fixed air exchange rate of 7 (standard) or 14 air changes per hour, it fully complies with ISO 188 Method B.
1. Key Features & Technical Highlights
✅ Laminar airflow ensures uniform air distribution and consistent testing conditions
✅ 50 L usable volume – compact yet powerful
✅ PLC-controlled color touchscreen – for accurate operation and temperature control
✅ Excellent temperature stability and distribution throughout the chamber
✅ Dual temperature sensors – one for control, one for measurement near the samples
✅ Compatible with logging software – for digital test data acquisition and analysis
2. Fixed Air Exchange Rate per Standard
✅ Factory-set throttle for 7 or 14 air changes per hour
✅ Fully compliant with ISO 188 Method B – aging under defined airflow conditions
3. Optimized for Demanding Aging Tests
✅ Ideal for finished products and large test specimens
✅ Includes support rods – adaptable to various sample types
📌 Note: For optimal performance, we recommend a stable ambient temperature between +10 °C and +30 °C.
With the EB 12-II high-speed cabinet oven, you get a precise, powerful, and standards-compliant solution for thermal aging tests under controlled airflow conditions.

Specifications:
Standards:
ISO 188 method B, ISO 4577, DIN 53508 P.6.2
Temperature range:
+40 °C to +200 °C (EB 12-II), +40 °C to +300 °C (EB 12-IIHT)
Useful volume:
50 litres
Accessories supplied:
- 15 sample rods
- Stylus pen for the instrument's touchscreen
- Accredited calibration incl. certificate
- Manual in English
Important specifications:
- High air velocity with laminar flow from bottom to top (1 ± 0.5 m/s)
- Fixed set air change rate of 7 (standard) or 14 changes per hour (preset by the manufacturer)
- Temperature fluctuation over time ± 0.25 °C
- Temperature fluctuation in the room ± 0.5 %
- Temperature display with sensor in the inner chamber (PLC)
- Temperature controller with 0.1°C setpoint (PLC)
- Adjustable upper and lower temperature limits with alarm (PLC)
- Fixed overtemperature protection
- Control via a micro PLC with colour touchscreen
- Test names can be specified in the PLC
- Improved insulation reduces energy consumption, environmental impact and costs
- Cooling channels in the housing for low surface temperature
- Power failure indication (PLC)
- Runtime meter (PLC)
- Countdown timer for each cell (PLC)
- Alarm history
- Door with two-point locking
- Easy installation and removal of the rack

EB 26HT – High-Performance Aging Cabinet with Carousel for Standards-Compliant Testing
The EB 26HT is a powerful aging cabinet designed for the thermal testing of rubber and plastic materials under controlled conditions. Featuring high airflow, a fixed air exchange rate according to ISO 188 Method C, and a rotating carousel system, it delivers maximum efficiency and testing safety.
1. Efficient Sample Mounting with Carousel
✅ Rotating carousel – enables quick and convenient sample loading
✅ Capacity for up to 36 specimens – ideal for batch testing and comparative analysis
2. Key Features & Technical Equipment
✅ 50 L usable volume – compact and high-performing
✅ PLC-controlled color touchscreen – for intuitive operation and accurate temperature control
✅ Excellent temperature stability and uniform distribution throughout the chamber
✅ Dual temperature sensors – for chamber regulation and near-sample monitoring
✅ Compatible with logging software – for seamless digital data recording
3. Additional Safety & Convenience Features
✅ Viewing window in the door – for quick visual checks during testing
✅ Internal chamber lighting – ensures visibility of samples and carousel
✅ Door safety sensor – automatically shuts off fan, heating, and carousel when the door is opened
4. Standards-Compliant Testing per ISO 188 Method C
✅ Fixed factory-set air exchange rate of 7 or 14 changes per hour
✅ High airflow with defined flow pattern – ensures consistent aging simulation
📌 Note: For best performance, we recommend a stable ambient temperature between +10 °C and +30 °C.
With the EB 26HT, you get a powerful, user-friendly, and standards-compliant solution for aging tests on elastomeric materials – with maximum efficiency and safety.
Specifications:
Standards:
ISO 188 method C, other equivalent standards
Temperature range:
+40 °C to +300 °C
Useful volume:
50 litres
Accessories supplied:
- Stylus pen for the touchscreen of the instrument
- Accredited calibration incl. certificate
- Manual in English
Important specifications:
- Carousel - which rotates during ageing - for quick and easy pick-up of up to 36 samples
- High air speed (0.5 ± 0.25 m/s)
- Fixed set air change rate of 7 (standard) or 14 changes per hour
- Temperature fluctuation in time ± 0.25 °C
- Temperature fluctuation in the room ± 0.5 %
- Temperature display with sensor in the inner chamber (PLC)
- Temperature controller with 0.1°C setpoint (SPS)
- Adjustable upper and lower temperature limits with alarm (PLC)
- Fixed overtemperature protection
- Control via a micro PLC with colour touchscreen
- Test names can be specified in the PLC
- Improved insulation reduces energy consumption, environmental impact and costs
- Cooling channels in the housing for low surface temperature
- Power failure indication (PLC)
- Runtime meter (PLC)
- Countdown timer for each cell (PLC)
- Alarm history
- Door with two-point locking

EB 27 – High-Precision Aging Cabinet for Advanced Standards Compliance
The EB 27 is a precision-controlled aging cabinet designed for the thermal aging of rubber and plastic materials under tightly regulated conditions. Equipped with two flow meters covering a wide range of 3 to 200 air changes per hour, it offers exceptional flexibility while maintaining low airflow velocity inside the chamber – ideal for standards-compliant aging tests.
1. Standards-Compliant Testing for Multiple Norms
The EB 27 meets the requirements of the following standards:
✅ ISO 188, Method A
✅ IEC 60811-401, IEC 60216-4-1
✅ ASTM D5423 Type 1 & 2, ASTM D573, ASTM E145 Type IIA
2. Key Features & Technical Highlights
✅ 120 L chamber capacity – ideal for large samples and batch testing
✅ PLC-controlled color touchscreen – intuitive operation and precise control
✅ Excellent temperature stability and uniformity throughout the chamber
✅ Dual temperature sensors – for accurate control and near-sample measurement
✅ Compatible with logging software – for standards-based data collection and analysis
3. Versatile Applications
✅ Suitable for finished products, sheet materials, and large-format specimens
✅ Includes shelves and support rods – flexible setup for a variety of sample types
📌 Note: For optimal performance, we recommend a stable ambient temperature between +10 °C and +30 °C.
With the EB 27 aging cabinet, you get a high-precision, versatile, and standards-compliant solution for demanding material tests in research and quality control.


Specifications:
Standards:
ISO 188 Method A, IEC 60811-401, IEC 60216-4-1, ASTM D5423 Type 1 and 2, ASTM E145 Type IIA, ASTM D573
Temperature range:
+40 °C to +200 °C
Useful volume:
120 litres
Accessories supplied:
- 2 shelves and 12 sample rods
- Stylus pen for the instrument's touchscreen
- Accredited calibration incl. certificate
- Manual in English
Important specifications:
- Low air velocity (0.001 to 0.02 m/s)
- Adjustable air exchange rate via flow meter, 3 to 200 revolutions per hour
- Temperature fluctuation over time ± 0.25 °C
- Temperature fluctuation in the room ± 0.5 %
- Delay time: 800 s (ASTM D5423 type 2), 620 s (ASTM E145 type IIA)
- Temperature display with sensor in the inner chamber (PLC)
- Temperature controller with 0.1°C setpoint (SPS)
- Adjustable upper and lower temperature limits with alarm (SPS)
- Fixed overtemperature protection
- Control via a micro PLC with colour touchscreen
- Test names can be specified in the PLC
- Low air pressure alarm (PLC)
- Improved insulation reduces energy consumption, environmental impact and costs
- Cooling channels in the housing for low surface temperature
- Power failure indication (SPS)
- Runtime meter (SPS)
- Countdown timer for each cell (SPS)
- Alarm history
- Microfilter for the air that removes 99.99% of all particles above 0.1 μm
- Door with two-point locking system
- Easy installation and removal of the shelf